ASI120 is a very fast and sensitive USB2.0 camera. Up to 30FPS under 1280X960 full resolution! With a peak QE of 75%, beyond ICX618 and with no FPN(Fixed pattern Noise)! Long time exposure supported up to 1000s.

Very good cameras with extra high image quality. Extra high sensitivity and extra low readout noise resulting exeptionally good image quality, or high snr (signal to noise ratio).

Output is 12 bit (over the usual 8 bit), readout time is very fast. ROI is supported, so it can be use as a lower resolution camera for planetary imaging with very-very high transfer rate. While transfer rate is 35fps at full resolution of the USB 2.0 models, the new 3.0 version has amazing 60fps maximal frame rate! At lower resolution it is even faster, 133fps at 640x480. Extremely good!

Supported OS: Windows XP 32bit/64bit, vista, Windows 7 32bit/64bit, Windows 8 32bit/64bit

ZWO ASI224MC USB 3.0 color camera, (1/3″ and 1.2M pixels sensor, IMX224 with SONY Exmor and NIR Technology, extremely low read noise (0.75e – 1.5 e) and high sensitivity especially in IR range)

ASI224MC has a 1/3″ and 1.2M pixels sensor IMX224 with SONY Exmor and NIR Technology.
Extremely low read noise (1.5 e) and high sensitivity especially in IR range.

Very suitable for astronomy planetary and small DSO imaging

Astrophotography Performance

ASI290MM offers very good performance for astrophotography. Low read noise, high dynamic range, QE peak about 80%, AR protective window and much more.

High QE

Relative QE Curve, we estimate the Peak Value is about 80%.

USB 3.0 Port & ST4 Port

USB 3.0 Port: can provide 5Gb bandwidth to let ASI290 run at 82.2fps (12bit, normal mode) or 170 fps (10bit, high speed mode)  at full resolution(2.1Mega).

ST4 Port: can be used connect with auto guide port of mount, for guiding.

Drivers and Softwares:

Our website has newest camera drivers and many DSO and Planetary capture softwares. Please make sure the newest driver and software has been installed before you start shooting:

https://astronomy-imaging-camera.com/software/

ASI290MM Mini camera integrates Sony IMX290 1/3″ sensor (5.6 mm x 3.2 mm). It is ZWO first mini camera. This camera has 1936 x 1096 pixels. The pixel size is 2.9 μm x 2.9 μm.  This camera provides 12bit ADC and its QE peak is over 80%.

Astrophotography Performance

ASI290 mini camera offers you very good performance for planetary imaging and guiding. Low read noise, high dynamic range, QE peak >80%, AR protective window and much more.

High QE

Relative QE Curve, we estimate the Peak Value is about 80%.

USB2.0Port & ST4 Port

USB 2.0 Port: Mini camera has one USB2.0 type C port. Type C port is very popular in mobile phones, it will not care about positive side and negetive side of the adapter.

ST4 Port: Can connect mini camera direct connect to auto guide port of mount.

What is in the box?

ASI mini camera box includes all necessary cables, adapters, and manuals.

Focus like a eyepiece

ASI mini camera can focus at same position as eyepiece. You can focus with a eyepiece, and put ASI mini camera into 1.25″ holder.

Drivers and Softwares:

Our website has newest camera drivers and many DSO and Planetary capture softwares. Please make sure the newest driver and software has been installed before you start shooting:

https://astronomy-imaging-camera.com/software/

Camera PoleMaster replaces the polar finder and guarantees most accurate polar aligning.

♦ Includes adapter for Mount Celestron Advanced VX

♦ The image is produced by a lens, the region of the sky is projected onto a sensitive CMOS sensor and analysed by an intelligent software.

♦ Perfect polar alignment is achieved for best possible tracking accuracy.
 

NexImage Solar System Imager

NexImage 10 Solar System Color Imager

• 5 Mega pixel color sensor with Micron® DigitalClarity® technology to dramatically reduce image noise levels
• Software automatically filters out video frames most affected by poor atmospheric conditions, leaving only the sharpest, clearest frames to be stacked and aligned into one high-quality image
• View and capture live video on your computer
• Manually adjust gain, contrast, exposure time, frame rate and color saturation using your PC
• Machined aluminum 1.25" adapter barrel with C-threads for direct threaded connection to almost any telescope 

• Enables automatic alignment of your Celestron computerized telescope*
• No need to identify or locate any star in the sky–StarSense automatically aligns your telescope, so you can begin observing in minutes
• Aligns in 3 minutes or less
• Provides advanced mount modeling—align on numerous stars throughout the sky for extremely precise GoTo pointing accuracy
• StarSense hand controller included

• Automatically align your computerized Sky-Watcher mount with StarSense
• No need to identify or locate any star in the sky – StarSense will automatically align your telescope, so you can begin observing in minutes. Plug and play compatibility (see compatibility list).
• Replaces the SynScan hand control, uses the Celestron StarSense hand control and StarSense camera. Comes with mounting bracket that is compatible with most Celestron and Sky-Watcher optical tubes.
• 3 AUX port accessories: Supports StarSense and optional GPS accessory.  Lightweight and easy to attach with the included tripod strap.